CNC760 - 6-Axis CNC Controller (400kHz)



This CNC controller is part of the professional line of Eding CNC controllers. Besides a standard 100Mbit Ethernet interface, the step frequency increased to 400 kHz. There are also now 4 extra extruder interfaces available for 3D printing applications.

A high-end CNC controller at a very competitive price with many interfaces already included makes it the foundation for building professional CNC machines. A few examples of its interfaces:

Digital I/O, analog inputs, 0-10V outputs, PWM outputs, pendant interface, support for numerous ways of cooling, protection in and outputs, and more

This product is of course fully supported by Eding CNC software solution.

Purchase

Technical Specifications

• 6 Axis controller interface
  • Step / Direction: 5V (max. 400kHz)
  • Enable: 5V or open collector (max. 24V)
  • Alarm: max. 24V
• 4x Extruder Interface: Enable, Step, Direction: 5V
• 6x Digital HOME inputs: Max. 24V (PNP or NPN)
• 10x Digital output (AUX): Open Collector (max. 24V)
• 10x Digital inputs (AUX): Max. 24V
• 8x Analog inputs: 0-3.3V (12 bits)
• 2x Analog output: 0-10V
• 2x Cooling outputs: Open collector (max. 24V)
• 8x PWM output: Open collector (max. 24V)
• Safety relay I/O
  • System ready output: Output for safety relay (Watchdog) Open Collector
  • External Error input: Max. 24V
  • E-stop Input: Max. 24V
• 1x Probe: Max. 24V (PNP or NPN)
• 1x Spindle encoder input: 5V input
• 1x RS485 interface: RS485, MODBUS compatible (for connection extra I/O or functionallity, cable length up to 20m)
• Handwheel interface (pendant)
  • 2x Digital input: 5V
  • 2x MPG input: 5V
  • 2x Analog input: 0-3.3V
• Interface: 100Mbit Ethernet
• Power supply: 24V DC
• Dimensions: 230x107mm (suitable for DIN rail mounting)
• Others: Firmware upgradable through the network connection

Controller Overview



Available accessories

Breakout Board

If you prefer to use separate wires to hook up your CNC760 this breakout board will help you. Simply plug this in on top of the CNC760 and start wiring your controller.

Read more - Purchase



Axis Breakout

With this breakout board, you can now also simply connect the axis and extruder outputs of the CNC760 with wires.

Read more - Purchase



DIN Rail Mount

To easily mount the CNC760 Controller on a DIN rail you can slide it into this housing and simply mount it on the DIN rail.

Read more - Purchase