website logo
Home pageWeb storeDistributors
Software
Hardware
Settings
Troubleshooting
Navigate through spaces
⌘K
Controllers
Controller Comparison
CNC310 - 3/4-Axis CNC Controller (125kHz)
CPU5A4(E) - 4-Axis CNC Controller (125kHz)
CNC720 - 4-Axis CNC Controller (400kHz)
CNC760 - 6-Axis CNC Controller (400kHz)
Firmware upgrade
Firmware changelog
Getting started with your new controller
Electronics Basics
Open Collector
SensorHUB
Wireless Pendant
Wired Pendant
Untitled doc
UIO-10
Docs powered by archbee 

Firmware changelog

25min

CNC310

1.00

  • Standard release firmware

1.01

  • Turns off TOOL output when the connection to the PC is lost
    • Requires full license software 4.03.62 and above


CPU5A

1.11

  • Standard release firmware

1.12

  • Increased watchdog tolerance for lower-end PCs
    • Requires software 4.03.62 and above


CPU5B-ENET

1.12

  • Standard release firmware

1.13

  • Turns off TOOL output when the connection to the PC is lost
    • Requires software 4.03.62 and above


CPU5B-USB

1.11

  • Standard release firmware

1.12

  • Turns off TOOL output when the connection to the PC is lost
    • Requires software 4.03.62 and above


CNC720 / CNC760

1.03

  • Add laser mode motion support

1.04

  • Add stepper motor spindle support
  • Add support for modifiable MODBUS baud rate, parity bits, and stop bits
  • Turns off TOOL output when the connection to the PC is lost
    • Requires software 4.03.62 and above


iCNC600

1.00

  • Standard release firmware

UIO-10

0.4

  • Standard release firmware

0.5

  • Inputs 14 and 15 are used as analog inputs for feed and speed override feature
    • Requires software 4.03.59 and above





PREVIOUS
Firmware upgrade
NEXT
Open Collector
Docs powered by archbee 
TABLE OF CONTENTS
CNC310
1.00
1.01
CPU5A
1.11
1.12
CPU5B-ENET
1.12
1.13
CPU5B-USB
1.11
1.12
CNC720 / CNC760
1.03
1.04
iCNC600
1.00
UIO-10
0.4
0.5