Hardware

💾Software
Hardware
Navigate through spaces
💾Software
Hardware
⌘K
CPU5A3/CPU5A4/CPU5A4E
Wireless Pendant
UIO-10
Docs powered by archbee 
1min

I/O overview

The I/O interface has input different inputs or dedicated inputs. The image belows shows an overview of all available connections.

Depending on the PC software and/or firmware version not all features might (yet) be available.



Document image

Please note, that the analog inputs for feed and speed override (FEED OV & SPEED OV) are only available at firmware version v0.5 or higher.

In the overview of the UIO-10 the different functions are colorized. They have the following meaning:

Name

Function

GND

Ground, also called 0V

+3.3V

Power, used by analog inputs

+5v

Power, 5V, used for connecting MPGs

Dig.Input

Digital input, can be switched to the ground.

Feed OV

Dedicated analog input for feed override (Firmware >0.5)

Speed OV

Dedicated analog spindle speed override (Firmware >0.5)

HWx-A/HWx-B

A/B signal for MPG. Max. 3 handwheels are supported



The MPGs/handwheels can only be connected to designated inputs. This will also be reflected in the setup of such an input.





Updated 05 Jul 2022
Did this page help you?
Yes
No
UP NEXT
Connecting a toggle or momentary switch
Docs powered by archbeeÂ