--- title: Jumpers & Indicators slug: cnc720/jumpers-and-indicators docTags: createdAt: 2023-04-21T14:06:23.000Z --- # Jumpers On the CNC720 are several jumpers so the behaviour of the board can easily be changed. ## Controller settings | Jumper | Function | | ------ | ------------------------------------------- | | JP10 | Reserved | | JP11 | Start with default IP Address: 172.22.2.100 | | JP12 | Skip the bootloader | ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/S3srOLY_BJ_Vweta5GW5x_image.png" size="70" width="672" height="718" position="center" darkWidth="672" darkHeight="718" showCaption="false"} ## E-Stop | Jumper | Function
(when jumper is placed) | Comment | | ------- | --------------------------------------------------------------------------------------------------------------------------- | -------------------------------- | | PWM OUT | \[1-2] Shut down on E-stop
\[2-3] Unchanged on E-stop | | | JP4 | E-stop bypass | Also connected to pin #12 on CN2 | | JP5 | Outputs disabled on E-stop | | | JP14 | AUX output behaviour on E-stop
\[1-2] Shut down on E-stop (as shown in picture below)
\[2-3] Unchanged on E-stop | | ![](https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/vhA2LREonkmjrfP_1q2xX_annotelyimage-2.png) ## Home | Jumper | Function | | ------ | --------------------- | | JP6 | HOME1 mode NPN or PNP | | JP7 | HOME2 mode NPN or PNP | | JP8 | HOME3 mode NPN or PNP | | JP9 | HOME4 mode NPN or PNP | ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/l6mMxZ_jzjR1dueYFwQhM_image.png" size="70" width="680" height="717" position="center" darkWidth="680" darkHeight="717" showCaption="false"} ## PWM & 0-10V | Jumper | Function | comment | | ------ | ---------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------- | | JP1 | Selection between PWM & 0-10V output
\[1-2] 0-10V
\[2-3] PWM | | | JP2 | PWM & 0-10V behaviour
\[1-2] Switched on/off by Sysready
\[2-3] Switched on/off by AUX out | Please note that if the AUXO1
is used, that output can not be used for other applications. | :::hint{type="info"} For PWM & 0-10V E-stop behaviour, go to: [E-stop](https://docs.edingcnc.com/Hardware/jumpers-and-indicators#6x_F9) ::: ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/My-lqVlmFEPA6rQFUGxPv_image.png" size="70" width="761" height="816" position="center" darkWidth="761" darkHeight="816" showCaption="false"} ## DRVARM | Jumper | Function | | ------ | ---------------------- | | JP15 | DRVARM mode NPN or PNP | ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/QCvCT-wma_r7GCVfFereZ_image.png" size="70" width="674" height="717" position="center" darkWidth="674" darkHeight="717" showCaption="false"} ## EXT-ERROR | Jumper | Function | | ------ | ------------------------- | | JP13 | EXT-ERROR mode NPN or PNP | ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/kOUTCYLPxQeBdf_Ib_IwS_image.png" size="70" width="674" height="721" position="center" darkWidth="674" darkHeight="721" showCaption="false"} ## Probe | Jumper | Function | | ------ | --------------------- | | JP3 | Probe mode NPN or PNP | ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/KsiBx_t6oYxthmsF62Rsa_image.png" size="70" width="764" height="817" position="center" darkWidth="764" darkHeight="817" showCaption="false"} # Indicators The board uses several LEDs indicating activity. ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/cjsogBPmL_cJ26F2dL1PF_image.png" size="38" width="400" height="682" position="center" darkWidth="400" darkHeight="682" showCaption="false"} ## Status | Indicator | Colour | Meaning | | --------- | ------ | --------------------------------------------------------------------------------------------------------------------- | | RDY | Green | SYSREADY indicates when the CNC system is ready for operation. Can be used in cooperation with a safety relay. | | WTD | Red | WATCHDOG charge pump, indicates the operation of the watchdog circuitry | | HRT | Yellow | Controller ‘heartbeat’ indicating the board is active | | LED2 | Green | Indicates ‘Machine On’ | | LED1 | Yellow | Flashing when the application is starting up.
After start-up, will be switched ON if E-STOP occurred. | | PWR | Blue | Power supply connected | :::hint{type="info"} Please note, when in bootloader mode LED2 and LED3 will toggle to indicate this. ::: ## Network ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/VaLPbMWCLckdB1_nAF5QQ_image.png" size="70" width="423" height="362" position="center" darkWidth="423" darkHeight="362" showCaption="false"} | Indicator | Colour | Meaning | | --------- | ------ | ------------------- | | ACT | Green | Network activity | | LNK | Yellow | Network connection | | | | | ## E-Stop ::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/CepuK71C_PlrJf-pdXBS8_image.png" size="50" width="282" height="335" position="center" darkWidth="282" darkHeight="335" showCaption="false"} | Indicator | Colour | Meaning | | --------- | ------ | ------------- | | STP | Red | E-Stop active |