Configuration Manual

this contronicsmanual describes how to use the software, and it's intended audiences are end user how operate a machine the setup tab contains most of the settings for the machine and interface settings are grouped by categories the purpose of all settings can be found by pressing the icon next to the corresponding setting this will open the documentation for this setting on the website, this will only work if the pc has access to the internet if no internet connection is available, all settings can be found on the system docid\ s1l78fd4wqkz4xhehcjlb page use the search on that page to find the appropriate setting settings can only be applied when the machine is in the ready state this means that no error can be present and no job can be running or paused reset the machine first before saving the settings machine general the machine general setup page contains machine type settings motor settings homing settings toolhead the toolhead setup page contains all toolhead settings feed & speed settings automatic tool changer settings tangential knife settings internal & external torch height control (thc) settings accessory devices the accessory devices setup page contains brake settings probe settings handwheel/pendant settings work coordinate camera settings traffic light settings vacuum table settings input/output the input/output setup page contains pwm settings input/output name settings input/output invert settings uio 10 settings safety the safety setup page contains e stop, drive error, and external error settings safety relay settings safety input settings safe velocity settings homing settings jogging settings pause settings setup password settings interpreter & trajectory the interpreter & trajectory setup page contains startup action settings macro file large file settings zeroing settings job time estimation settings g code settings trajectory interpolation settings look ahead feed settings lathe settings user interface the user interface setup page contains appearance/theme settings language settings startup settings text editor settings resource settings unit settings display settings 3d view settings behavior settings extended user button settings special purpose the special purpose setup page contains vendor specific settings diagnostic settings power outage settings default job file settings current job file monitor settings kinematic settings miscellaneous settings license & support the license & support setup page contains support archive generation requesting additional license options