This command will only be executed when the machine type is set to 

Retrieves the current value of the Vact of the height control.

The resulting value is stored in the specified variable.

GetJobDistance

GetHeightControlVact

default_ip

M-code function override and user M-code functions

Special features

Software

[Public] Software

EdingCNC Documentation

Network setup

Software license

Software installation

Introduction

Variables

Modal groups

Language standard

G0 (Rapid Linear Motion)

G1 (Linear Motion Feed at Feed Rate)

G2, G3 (Arc at Linear Feed)

G4 (Dwell)

G10 (Set Coordinate System Data)

G17, G18, G19 (Plane Selection)

G20, G21, G70, G71 (Length Units)

G28, G30 (Return to Home)

G33, G33.1 (Spindle-Synchronized Motion)

G38.2 (Straight Probe)

G40, G41, G41.1, G42, G42.1 (Cutter Radius Compensation)

G43, G43.1, G49 (Tool Length Offset)

G50, G51 (Scaling)

G53 (Move in Absolute Coordinates)

G54 - G59.3 (Select Coordinate System)

G61, G64 (Path Control Mode and Look Ahead Feed)

G68 (Coordinate System Rotation)

G76 (Threading lathe)

G80 (Cancel Modal Motion)

G81 - G89 (Canned Cycles)

G90, G91 (Set Distance Mode)

G92, G92.1, G92.2, G92.3 (Coordinate System Offset)

G93, G94, G95 (Set Feed Rate Mode)

G96, G97 (Spindle Control Mode)

G98, G99 (Set Canned Cycle Return Level)

Supported G-code

M0, M1, M2, M30, M60 (Program Stopping and Ending)

M3, M4, M5, M90 - M97 (Spindle/Tool head Control)

M6 (Tool Change)

M7, M8, M9 (Coolant Control)

M48 - M53 (Feed-Speed Override Control)

M54, M55, M56, M57 (General purpose IO)

M26, M27 (Rotary axis clamping)

M20, M21, M22 (Torch height control / Plasma THC)

M10, M10; Laser control (CNC7xx series only)

M1, M100, M104, M106, M107, M140, M143, M190; (3D printer control, discontinued)

Supported M-codes

F; (Feed rate)

S (Tool intensity/spindle speed)

T (Tool number)

Other input codes

WaitForRLYUpdate

WarnMsg

ErrMsg

LogMsg

LogFile

DlgMsg

GetToolInfo

SP (Store Position)

TCAGuard

MCAGuard

HomeIsEStop

Exec

SetAcc

Vacuum

Special commands

G-code

Macro programming

Run behavior during loading of job file and simulation

M Function override and user M-functions

Master-slave / Tandem axis operation

Oil pump

Features

Keyboard shortcuts

Interface

Release notes

GetHeightControlVact

Example