laserengrave enables the laser motion mode. Use this command in MDI or in G-code at the start of a jobThis command changes the working mode of your controller board, restricting it to XYZ axes.

HomeIsEStop

Laserengrave

E-Stop

controller_name

Test

controller_max_axes

controller_current_consumption

default_status_view_ip

default_pc_ip

default_controller_ip

LogFile

Software

[Public] Software

EdingCNC Documentation

PC Requirements

Software installation

Network setup

Overview

1. Tab overview

User interface

Getting started

Introduction

Keyboard shortcuts

Software license

Profiles

Using the goto menu

How to...

Software Manual

Milling un-even surfaces / Z-heigh compensation

Mapping X/Y G-code to cylinder on A-Axis

Configuring an automatic oil pump

How to use...

System parameters/Variables

Language standard

G0 (Rapid Linear Motion)

G1 (Linear Motion Feed at Feed Rate)

G2, G3 (Arc at Linear Feed)

G4 (Dwell)

G10 (Set Coordinate System Data)

G17, G18, G19 (Plane Selection)

G20, G21, G70, G71 (Length Units)

G28, G30 (Return to Home)

G33, G33.1 (Spindle-Synchronized Motion)

G38.2 (Straight Probe)

G40, G41, G41.1, G42, G42.1 (Cutter Radius Compensation)

G43, G43.1, G49 (Tool Length Offset)

G50, G51 (Scaling)

G53 (Move in Absolute Coordinates)

G54 - G59.3 (Select Coordinate System)

G61, G64 (Path Control Mode and Look Ahead Feed)

G68 (Coordinate System Rotation)

G76 (Threading lathe)

G80 (Cancel Modal Motion)

G81 - G89 (Canned Cycles)

G90, G91 (Set Distance Mode)

G92, G92.1, G92.2, G92.3 (Coordinate System Offset)

G93, G94, G95 (Set Feed Rate Mode)

G96, G97 (Spindle Control Mode)

G98, G99 (Set Canned Cycle Return Level)

Supported G-code

M0, M1, M2, M30, M60 (Program Stopping and Ending)

M3, M4, M5, M90 - M97 (Spindle/Tool head Control)

M6 (Tool Change)

M7, M8, M9 (Coolant Control)

M48 - M53 (Feed-Speed Override Control)

M54, M55, M56, M57 (General purpose IO)

M26, M27 (Rotary axis clamping)

M20, M21, M22 (Torch height control / Plasma THC)

M10, M11; Laser control (CNC7xx series only)

M1, M100, M104, M106, M107, M109, M140, M143, M190; (3D printer control, discontinued)

Supported M-codes

F; (Feed rate)

S (Tool intensity/spindle speed)

T (Tool number)

Other input codes

Flow control

Order of execution

Supported operations on expressions

Run behavior during loading of job file and simulation

M Function override and user M-functions

Macro programming

DlgMsg

Dwell

ErrMsg

Exec

FloodOff

FloodOn

GetHeightControlVact

GetJobDistance

GetToolInfo

LogMsg

MCAGuard

MistOff

MistOn

Modbus

SetAcc (set acceleration)

SetPos (set position)

SP (Store Position)

TCAGuard

Vacuum

WaitForRLYUpdate

WarnMsg

Special commands

M-code function override and user M-code functions

Special features

G-code

EdingCNC post-processor

Release notes

Laserengrave

Laserengrave XY

laserengrave OFF