---
title: Service tab
slug: service-tab
docTags: 
createdAt: 2024-09-06T14:17:13.100Z
---

![](https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/JEna4hLUg5mlwxb1vJNcn_service.png)

The service tab shows information relevant to servicing the machine. It shows the times and distances that the machine has run.

# Service status

::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/Tt_6NwMKDtQIh9qMLxjK6_service-service-status.png" size="70" width="876" height="560" position="flex-start" showCaption="false"}

- **Job time \[h]** - The time in hours that the machine has performed jobs since receiving service.
- **Job distance \[unit]** - The distance that the machine has cut in the units selected by the user since receiving service.
- **Number of jobs done** - The number of jobs the machine has performed since receiving service.
- **Reset** - Pressing this button resets the service status when the machine has received service.

# Machine working status totals

::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/yaT4CHJsBLyC6BTnVvthj_service-machine-working-status-totals.png" size="70" width="876" height="560" position="flex-start" showCaption="false"}

- **Total job time \[h]** - The total time in hours that the machine has performed jobs
- **Total distance \[unit]** - The total distance that the machine has cut in the units selected by the user
- **Total number of jobs done** - The total number of jobs the machine has performed

# Service parameters

::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/EULUcj7pl0PL0if4G_gXH_service-service-parameters.png" size="70" width="876" height="560" position="flex-start" showCaption="false"}

- **Service time interval \[h]** - The time interval for service, the software will show a message when this time has elapsed at the end of a job.
- **Service distance interval \[unit]** - The traveled distance interval for service, the software will show a message to indicate the machine needs service.
- **Save service interval changes** - Pressing this button saves the interval settings

# Pump parameters

::Image[]{src="https://api.archbee.com/api/optimize/wP9peVc2bAVBPOh6IboCS/vb0tN3HRY9xEM90ZM0xKy_service-pump-parameters.png" size="70" width="876" height="560" position="flex-start" showCaption="false"}

Configuring the pump settings is explained on its specific page [Configuring an automatic oil pump](docId:0ZdtgcXnxakIhbvmR1Yph).