Shows an error message in the message log and stops current action of the machine.

WarnMsg

ErrMsg

controller_max_axes

controller_current_consumption

default_status_view_ip

default_pc_ip

controller_name

default_controller_ip

LogMsg

Software

[Public] Software

EdingCNC Documentation

Introduction

Keyboard shortcuts

Coordinates

Service

Setup

Tabs

User Interface

Network setup

Profiles

Software license

Getting started

Milling un-even surfaces / Z-heigh compensation

Mapping X/Y G-code to cylinder on A-Axis

Linear pitch compensation

Configuring an automatic oil pump

How to use...

System parameters/Variables

Language standard

G0 (Rapid Linear Motion)

G1 (Linear Motion Feed at Feed Rate)

G2, G3 (Arc at Linear Feed)

G4 (Dwell)

G10 (Set Coordinate System Data)

G17, G18, G19 (Plane Selection)

G20, G21, G70, G71 (Length Units)

G28, G30 (Return to Home)

G33, G33.1 (Spindle-Synchronized Motion)

G38.2 (Straight Probe)

G40, G41, G41.1, G42, G42.1 (Cutter Radius Compensation)

G43, G43.1, G49 (Tool Length Offset)

G50, G51 (Scaling)

G53 (Move in Absolute Coordinates)

G54 - G59.3 (Select Coordinate System)

G61, G64 (Path Control Mode and Look Ahead Feed)

G68 (Coordinate System Rotation)

G76 (Threading lathe)

G80 (Cancel Modal Motion)

G81 - G89 (Canned Cycles)

G90, G91 (Set Distance Mode)

G92, G92.1, G92.2, G92.3 (Coordinate System Offset)

G93, G94, G95 (Set Feed Rate Mode)

G96, G97 (Spindle Control Mode)

G98, G99 (Set Canned Cycle Return Level)

Supported G-code

M0, M1, M2, M30, M60 (Program Stopping and Ending)

M3, M4, M5, M90 - M97 (Spindle/Tool head Control)

M6 (Tool Change)

M7, M8, M9 (Coolant Control)

M48 - M53 (Feed-Speed Override Control)

M54, M55, M56, M57 (General purpose IO)

M64, M65, M66, M67 (Phoenix Contact Axioline IO)

M26, M27 (Rotary axis clamping)

M20, M21, M22 (Torch height control / Plasma THC)

M10, M11; Laser control (CNC7xx series only)

M1, M100, M104, M106, M107, M109, M140, M143, M190; (3D printer control, discontinued)

Supported M-codes

F; (Feed rate)

S (Tool intensity/spindle speed)

T (Tool number)

Other input codes

Laserengrave

WaitForRLYUpdate

LogFile

DlgMsg

GetToolInfo

SP (Store Position)

TCAGuard

MCAGuard

HomeIsEStop

Exec

SetAcc

Vacuum

GetJobDistance

GetHeightControlVact

Modbus

Special commands

M-code function override and user M-code functions

Special features

Flow control

Order of execution

Supported operations on expressions

Run behavior during loading of job file and simulation

M Function override and user M-functions

Macro programming

G-code

EdingCNC post-processor

Release notes