Due to higher computational power requirements, only our latest controllers can take advantage of the 

The laser engrave control mode is not compatible with CPU5A, CPU5B, CNC310, or iCNC600.

Please note that this does not make these controllers incompatible with laser accessories entirely, but it does mean that switching the laser cannot be done during motion, without stopping, which may influence the laser engraving end result.

Trigger an action other than through the user interface, with an input

CPU5A and LaserEngrave mode command that switches the laser on/off during motion

default_ip

When loading a job, the job text appears as "ASCII2UC FAILURE"

Common questions

[Public] Common questions

Warning "G21/G20 used but configuration specifies.."

Warning "Macro does not specify unit"

Error "Add ZHC point not on GRID"

Error BNC700001 "CNC Software already running on this computer"

Error "Tool radius not less than arc radius with compensation"

Warning "Machine axes are not homed - limits are not active

Error / warning messages

Run code at the end of a job

Use a DXF/DWG/SVG/STEP/STL file

Rename an input/output

Apply configuration to a new installation

Restore the configuration to an earlier state

Disable feed rate / speed override

Set feed rate / speed override to a value at beginning of a job

Configure homing if an axis does not require homing or is homed manually

Add a macro button to Operate view

Get more inputs/outputs

Run macro by using wireless pendant

Start a job by triggering a hardware input?

How to

Rough motion with handwheel

Keyboard arrow keys jog the wrong axes

Common problems

Troubleshooting