Home page
Web store
Distributors
Software
š
Hardware
Settings
Troubleshooting
Navigate through spaces
ā
K
Common questions
Error / warning messages
Warning "G21/G20 used but configuration specifies.."
Warning "Macro does not specify unit"
Error "Add ZHC point not on GRID"
Error BNC700001 "CNC Software already running on this computer"
Error "Tool radius not less than arc radius with compensation"
Warning "Machine axes are not homed - limits are not active
How to
Run code at the end of a job
Use a DXF/DWG/SVG/STEP/STL file
Rename an input/output
Apply configuration to a new installation
Restore the configuration to an earlier state
Disable feed rate / speed override
Set feed rate / speed override to a value at beginning of a job
Configure homing if an axis does not require homing or is homed manually
Add a macro button to Operate view
Get more inputs/outputs
Run macro by using wireless pendant
Start a job by triggering a hardware input?
Trigger an action other than through the user interface, with an input
CPU5A and LaserEngrave mode command that switches the laser on/off during motion
Common problems
When loading a job, the job text appears as "ASCII2UCĀ FAILURE"
Rough motion with handwheel
Keyboard arrow keys jog the wrong axes
Troubleshooting
Docs powered by
Ā
Archbee
Common problems
Rough motion with handwheel
it is possible that the machine vibrates during handwheel usage on machines with high acceleration values for a solution, please take a look at the wireless pendant docid\ dyrcfzs tnoutlsam0aq4
PREVIOUS
When loading a job, the job text appears as "ASCII2UCĀ FAILURE"
NEXT
Keyboard arrow keys jog the wrong axes
Docs powered by
Ā
Archbee
Docs powered by
Ā
Archbee