Handwheel count per revolution Pulse count generated by the handwheel during a full revolution.
This value is often 400.
Handwheel velocity percent Percentage of maximum machine axis velocity to be used as velocity value when performing motion with a handwheel.
Handwheel acceleration percent Percentage of maximum machine axis acceleration to be used as acceleration value when performing motion with a handwheel.
If motion issued by the handwheel is not smooth, it is recommended to lower this value.
Handwheel velocity X1 mode Determines that the handwheel will work in velocity mode, with ×1 position multiplier.
If handwheelX1VelMode, handwheelX10VelMode and handwheelX100VelMode settings are inactive, the handwheel will work in position mode. Please note that in position mode, motion does not stop when the handwheel movement stops, but once the machine reaches position.
Handwheel velocity X10 mode Determines that the handwheel will work in velocity mode, with ×10 position multiplier.
Handwheel velocity X100 mode Determines that the handwheel will work in velocity mode, with ×100 position multiplier.
Axis selection input Input to be used with handwheel for axis selection.
Multiplication factor select analog input Input to be used with handwheel for multiplication selection.
Handwheel type Used handwheel type. Choice between handwheel wired to the controller to the MPG inputs, or wireless handwheel with an USB receiver connected to the computer.