Website logo
Home pageWeb storeDistributors
Software
šŸ­Hardware
Settings
Troubleshooting
Navigate through spaces
āŒ˜K
Common questions
Error / warning messages
Warning "G21/G20 used but configuration specifies.."
Warning "Macro does not specify unit"
Error "Add ZHC point not on GRID"
Error BNC700001 "CNC Software already running on this computer"
Error "Tool radius not less than arc radius with compensation"
Warning "Machine axes are not homed - limits are not active
How to
Run code at the end of a job
Use a DXF/DWG/SVG/STEP/STL file
Rename an input/output
Apply configuration to a new installation
Restore the configuration to an earlier state
Disable feed rate / speed override
Set feed rate / speed override to a value at beginning of a job
Configure homing if an axis does not require homing or is homed manually
Add a macro button to Operate view
Get more inputs/outputs
Run macro by using wireless pendant
Start a job by triggering a hardware input?
Trigger an action other than through the user interface, with an input
CPU5A and LaserEngrave mode command that switches the laser on/off during motion
Common problems
When loading a job, the job text appears as "ASCII2UCĀ FAILURE"
Rough motion with handwheel
Keyboard arrow keys jog the wrong axes
Troubleshooting
Docs powered byĀ Archbee
How to

Get more inputs/outputs

If your needs require more inputs/outputs than you currently have, we recommend considering another controller.

Otherwise, we offer our RLY8 device which adds 8 relay outputs and 8 opto-coupled inputs. The RLY8 device is compatible with controllers that support MODBUS, such as the CNC7xx and the iCNC600.

Did this page help you?
PREVIOUS
Add a macro button to Operate view
NEXT
Run macro by using wireless pendant
Docs powered byĀ Archbee
Docs powered byĀ Archbee